A tom and a cymbal on one stand
The stand carries a tom holder and a cymbal boom on a single base, which frees up floor space and keeps a tom and cymbal together where you want them.

Tama's Roadpro HTC807W combination stand: an Omni-Ball tom holder that slides 60 mm forward or back, a 300 mm cymbal boom with a toothless Quick-Set Tilter, and a heavy double-braced base.
Taxes included.
1 in stock
Ask on WhatsAppProduct details are added automaticallyThe stand carries a tom holder and a cymbal boom on a single base, which frees up floor space and keeps a tom and cymbal together where you want them.
Loosen the bolt on the tom holder and the tom slides forward or back by up to 60 mm, so you can fine-tune its position without moving the whole stand.

Tama's Omni-Ball system has been trusted by professional drummers for more than twenty years for its rock-solid hold. Loosen a single T-nut and you can set the tom at almost any angle, then lock it firmly in place.

Tama's patented toothless tilter holds its position with the friction of six smooth metal disc plates instead of toothed gears. You can set the cymbal at exactly the angle you want rather than the nearest gear step, and the mechanism is more durable than a gear tilter (U.S. Pat. 7385127).

The 300 mm boom arm places the cymbal close above or beside the tom without a long arm reaching across your kit.
Squeeze the two buttons on its sides and the Cymbal Mate slips on or off in one move, so changing cymbals between songs or at the end of a gig is quick. Turning it still fine-tunes how freely the cymbal can swing, just like a standard Cymbal Mate (U.S. Pat. 7629526).

The Glide-Tite Grip Joint uses a metal-to-metal contact point for a more secure attachment and a very solid anchor. Because the stand doesn't move with the drum or cymbal, more of its natural resonance comes through (U.S. Pat. 9631656).
Nylon washers are fitted into the leg joints. They make the legs open and fold more smoothly and help the stand last longer on the road.

The base section uses 28.6 mm diameter tubing on double-braced legs to carry the combined weight of a tom and a cymbal. The stand weighs 5.4 kg.
One tom on the Omni-Ball tom holder and one cymbal on the 300 mm boom arm.
Both are Roadpro combination stands with the same 28.6 mm double-braced base, Omni-Ball tom adjustment, Quick-Set Tilter, Quick-Set Cymbal Mate, Glide-Tite Grip Joint and 300 mm boom. The HTC807W adds movable tom positioning, so the tom can slide forward or back by up to 60 mm.
Loosen the bolt on the tom holder, slide the tom forward or back (up to 60 mm) and tighten the bolt again.
Loosen the single T-nut on the Omni-Ball, set the tom to the angle you want and tighten it again.
| Specification | Details |
|---|---|
| Brand | Tama |
| Series | Roadpro |
| Model | HTC807W |
| Model name | Roadpro Combination Tom/Cymbal Stand |
| Type | Combination tom/cymbal stand |
| Specification | Details |
|---|---|
| Tom angle adjustment | Omni-Ball |
| Tom positioning | Movable, up to 60 mm forward/back |
| Cymbal tilter | Quick-Set Tilter, toothless (U.S. Pat. 7385127) |
| Cymbal Mate | Quick-Set Cymbal Mate (U.S. Pat. 7629526) |
| Joint | Glide-Tite Grip Joint (U.S. Pat. 9631656) |
| Leg joints | Nylon washers |
| Specification | Details |
|---|---|
| Base section tubing | 28.6 mm diameter |
| Legs | Double braced |
| Specification | Details |
|---|---|
| Boom arm length | 300 mm (11 3/4") |
| Weight | 5.4 kg |
Real drummer feedback
Own or regularly play this model? Share what it feels and sounds like so another drummer can choose with confidence.
Write an honest reviewCymbal Stands
Cymbal Stands
Cymbal Stands
Cymbal Stands
Cymbal Stands
Cymbal Stands
Cymbal Stands
Cymbal Stands
Cymbal Stands
Reviews
There are no reviews yet.